Christmas light installation for Dallas homes
We design, hang, maintain and take down professional Christmas lights. You get a written quote, an install date and a house that is lit by the time you get home.
Pick any mix
Rooflines and gables
Commercial-grade LED C9 bulbs on spaced socket wire, cut to the length of each run so there is no slack. Warm white, pure white or multicolor.
Trees
LED mini lights wrapped on the trunk and main limbs. We price each tree by height and how tight the wrap is. Full canopy wraps on request.
Shrubs and beds
Net lights over hedges and shrub beds along the front of the house, so the bottom of the house is lit along with the top.
Wreaths and garland
Lit garland on columns, rails and around the front door, plus wreaths sized to be seen from the street.
Walkways
Stake lights along a front walk or drive. They help guests in the dark and frame the house in photos.
Timers
Everything goes on outdoor timers so the lights come on at dusk and go off when you want, without anyone flipping a switch.
One quote, start to finish
- A look at your house and a written quote
- Commercial-grade LED lights, clips, outdoor cords and timers
- Installation on the day we agree on
- Repairs during the season if something we installed goes out
- Takedown in the first two weeks of January
You do not buy lights, store lights or climb anything.

How we attach lights to your roof
Nothing gets nailed, stapled or screwed into the house. The clip depends on the roof.
| Roof | How we attach | Why |
|---|---|---|
| Composition shingle | Shingle clips or gutter clips | Clips slide under the shingle edge or onto the gutter lip and pull out clean in January. |
| Clay tile | Gutter or eave-edge clips, from ladders | Clay tile cracks under foot, so we keep off the roof field. |
| Slate | Gutter or eave-edge clips, from ladders | Slate breaks easily and is expensive to replace. Same approach as tile. |
Power and electrical
We plug into the outdoor outlets your house already has and keep each circuit inside a safe load. LED lights help here, since the U.S. Department of Energy says LED holiday strands use about 70 percent less energy than incandescent ones.
If your lights need power somewhere you do not have an outlet, have a licensed electrician add one before install day. We do not add outlets or circuits.
Installation questions
Will the clips damage my roof or gutters?
No. We never nail, staple or screw anything into your house. Lights hang on plastic clips made for shingles, gutters and eave edges, and they come off clean in January.
Can you hang lights on a clay tile or slate roof?
Yes. Tile and slate crack under foot, so on those roofs we work from ladders and clip to the gutter or eave edge instead of walking the roof. A lot of homes in Highland Park and Lakewood have tile or slate, so we look at the roof before we quote.
Do you wrap trees?
Yes. Trunk plus main limbs is the most common request. We price each tree on its own, based on height and how tight you want the wrap. Full canopy wraps are possible and cost more.
Do I need an electrician?
Usually not. We plug into the outdoor outlets you already have and put everything on timers. If the lights need power somewhere you do not have an outlet, have a licensed electrician add one before install day. We do not add outlets or circuits.
LED or incandescent bulbs?
We use LED. The U.S. Department of Energy says LED holiday strands use about 70 percent less energy than incandescent strands, and they are sturdier and last longer.
Stay off the ladder this year
Send us your address and a photo of your house. We will send back a written quote for install, in-season fixes and January takedown.