Questions

Christmas light installation FAQ

Straight answers about cost, timing, your roof and your power. If yours is not here, ask us when you request a quote.

How much does Christmas light installation cost in Dallas?

Angi puts the national average at about $444, with most homeowners paying $220 to $684. North Dallas homes tend to run higher because of longer rooflines, taller gables and big trees. Dallas-area installers we reviewed in November 2026 published $5 to $12 per linear foot of roofline, with job minimums of $750 to $1,000. We quote your house by the foot you actually want lit, plus trees and extras, after a free look.

See how we price

When should I book?

As early as you can. We start installing in early November and keep going until mid-December. The weeks right before Christmas are the first to fill, so if you want lights up by Thanksgiving, book in October or the first week of November.

When do you take the lights down?

In the first two weeks of January. Takedown is part of the price, so you never have to get on a ladder to take anything down.

Do you supply the lights?

Yes. We bring commercial-grade LED lights, clips, outdoor cords and timers. The quote covers all of it, so you do not have to buy anything or store anything.

Will the clips damage my roof or gutters?

No. We never nail, staple or screw anything into your house. Lights hang on plastic clips made for shingles, gutters and eave edges, and they come off clean in January.

Can you hang lights on a clay tile or slate roof?

Yes. Tile and slate crack under foot, so on those roofs we work from ladders and clip to the gutter or eave edge instead of walking the roof. A lot of homes in Highland Park and Lakewood have tile or slate, so we look at the roof before we quote.

Do you wrap trees?

Yes. Trunk plus main limbs is the most common request. We price each tree on its own, based on height and how tight you want the wrap. Full canopy wraps are possible and cost more.

Do I need an electrician?

Usually not. We plug into the outdoor outlets you already have and put everything on timers. If the lights need power somewhere you do not have an outlet, have a licensed electrician add one before install day. We do not add outlets or circuits.

LED or incandescent bulbs?

We use LED. The U.S. Department of Energy says LED holiday strands use about 70 percent less energy than incandescent strands, and they are sturdier and last longer.

LED vs incandescent, explained

Warm white or multicolor?

Either one. Warm white looks clean on brick and stone and is the most common pick in the Park Cities. Classic multicolor C9s suit a lot of older East Dallas homes. We can light one section both ways so you can see before we hang the rest.

Do I need to be home on install day?

No, as long as we can get to the outdoor outlets and any side gates. We text you when we arrive and send a photo when we finish.

What if a bulb or strand goes out before Christmas?

Text us. If something we installed stops working during the season, we come back and fix it at no charge.

What do you need from me for a quote?

Your address, a photo of the front of the house, and what you want lit: roofline, trees, bushes, wreaths or walkway. We will follow up with a written quote.

Stay off the ladder this year

Send us your address and a photo of your house. We will send back a written quote for install, in-season fixes and January takedown.

Free quote